Sabtu, 18 Januari 2014

The Wilson Manufacturing Company uses a machine to stamp out parts for lawn mowers. On average, the machine wi?

best lawn mower for $1000 on ... COMMERCIAL ZERO TURN. 61
best lawn mower for $1000 image



Ruby


The Wilson Manufacturing Company uses a machine to stamp out parts for lawn mowers. On average, the machine will produce 7 defective parts for each 1,000 made. Using a direct variation formula, determine the number of defective parts that would be expected if the machine produced 7,000 parts.


Answer
Hi,
The direct variation formula is y = kx, where k is the constant of variation. In this case, the parts made is "x" and the defectives is "y." Plug your given points in to find the constant of variation.

7 = 1000k
1000k = 7
k = 7/1000

So now you found your constant of variation. You have also created your equation. Plug 7,000 for x to find out the number of defectives for the new one.

y = 7/1000 * 7000
y = 49

So if the machine produced 7,000 parts, 49 would be defective.

What is the best way to convert a gas powered lawn mower to electric power? Best batteries?




justwannak


The yard I mow with the mower I want to convert is almost 5 acres. What's the ideal mower to use for converting purposes?


Answer
Any mower will do.
There is 2 ways of doing this.
First is to take a riding lawn mower and remove the engine and axle. Replace the axle with an electric transaxle (These are quite common these day), look for one that is minimum 1000 to 1200 watts. You will need a motor controller for this and throttle (There are foot pedal throttles.), make sure the controller has a reverse function on it. Then you will need a motor (At least 1hp to run the blades - single blde of 36", 2hp for multiple blades)

or, use a lawn mower that has a hydrualic transaxle (very common these days) on it. This way you don't have to purchase a new axle and controller. With this you will need at least a 3hp DC motor that runs at 3500-3700rpm.

Most mowers now use a belt system to transfer power from the motor to the axle and blades.

Now batteries.....this is where it gets expensive. It needs batteries that have a high amp output(Discharge rate), with a high aH (Amp Hour)..and if you use a 24, 36 or 48DC motor, these can range from $300 to $1000 each. (i.e. golf cart batteries which are generally 6 volts). Or you can go for some exoctic battery packs, but these can run $1200 - $3000.

This is why the major manufactuers like Deere don't have any models really to speak of. It's not the cost of manufacturing the battery riding mower, which is about the same as a gas mower, but it is the cost of the batteries. (Say a $1400 riding gas mower, would be about $3500 - $4500 as a battery mower.)

There are some great sites out there for batteries and motors. You can search under "EV", electric vehichle supplies.

By the way, I am making a riding battery lawn mower for myself right now for my 2 acres.




Powered by Yahoo! Answers

Tidak ada komentar:

Posting Komentar